A25-60-1548
Automatic retractable bollard - Withstands the impact of a 1.5-tonne car at 48km/h
Automatic retractable bollards
A25-60-1548
Automatic retractable bollard - Withstands the impact of a 1.5-tonne car at 48km/h
Standard characteristics:
- Cylinder:
- Cataphoresis treated steel Ø 25 cm - height 60 cm, stainless steel finishing disc
- Microblasted stainless steel sleeve
- LED strip
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Frame:
- Non-slip chequered stainless steel floor plate
- 4-point guide with HDPE sliders
- HDPE lateral stop for greater rigidity and guiding precision
- Steel installation casing with reinforcements
- Drive system:
- 230V hydraulic drive system integrated into the bollard frame in a compartment accessible without disassembling the bollard, with push-pull quick-release coupler
- Upper and lower limit switches integrated on a removable support, accessible without disassembling the bollard
- Distribution block, with waterproof socket integrated into the motor compartment and 10 m connection cable to One-C control logic
- Biodegradable hydraulic oil with low viscosity variation
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the technical specifications for accessibility of roads and public spaces
Optional features:
Security
- Additional connection cable length
- Heating system for cold weather or exposure to snow or frost conditions
- NC solenoid valve: Bollard freezes in position in the event of
power failure
Customisation
- Choice of RAL colours on stainless steel sleeve
- Customisation of the bollard head
- Operation time : 4 to 6 s
- MCBF (number of cycles) : 2 000 000
- MTBF (hours) : 25,000 h
- MTTR (min) : 30 min
- Finishes : Microblasted stainless steel
- Voltage : 230V
- Power : 680 W
- Drive system : Integrated hydraulics
- Resistance : 250,000 J
- Behavior in case of power cut : Positive (gravity lowering system without electrical assistance in the event of power failure)
- Foundation dimensions (LxWxH) : 500 x 460 mm
- Overall dimensions (LxWxH) : 600 mm / 250 mm
- Operating temperature : '-20°C to +50°C
- Connection cable : 10 m connection cable supplied
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product