A25-90 C50
Automatic retractable bollard - Withstands the impact of a 7.5 HGV at 80 km/h
Automatic retractable bollards
A25-90 C50
Automatic retractable bollard - Withstands the impact of a 7.5 HGV at 80 km/h
The ALE A25-90-C50 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system.
Made of steel 25 cm in diameter, 90 cm high and painted with RAL, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel.
The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module.
This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements
Its resistance is certified with a double crash test, during which the bollard stopped two 7.5-tonne HGVs travelling consecutively at 48 then 80 km/h, with the bollard remaining operational after both impacts.
Standard specifications
Technical specifications
Standard characteristics:
- Cylinder:
- Steel treated with zinc plating and epoxy powder coating Ø 25 cm - height 90 cm
- RAL 7016 colour
- Stainless steel bollard top, thickness 20 mm
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Frame:
- Heavy-gauge steel floor plate protected by a stainless steel cover plate
- Frame made of 6 mm thick galvanised steel
- Lateral guide with HDPE sliders and rollers
- M16 anchor bracket, strengthening connection to the concrete foundation
- Drive system:
- Remote hydraulic drive (factory connected circuit), the bollard is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
- Low limit switch integrated into the cylinder head, accessible without disassembling the bollard
- Biodegradable hydraulic oil with low viscosity variation
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the accessibility of roads and public spaces
Optional features:
Security
- Upper limit switch
- Snap-off nuts to secure bollard access
- Heating system for cold weather or exposure to snow or frost conditions
- Cold weather oil
Customisation
- Choice of RAL colours
- Paint with seafront treatment
- Customisation on the bollard head
- Installation aid: Installation kit (steel cage foot hanger)
- Operation time : From 4 to 6 seconds
- MCBF (number of cycles) : 3 000 000
- MTBF (hours) : 25 000
- MTTR (min) : 30 min
- Finishes : RAL 7016 steel colour
- Voltage : 230 V
- Power : 680 W
- Drive system : Remote hydraulics
- Resistance : 1,850,000 J
- Foundation dimensions (LxWxH) : 430 x 430 mm
- Overall dimensions (LxWxH) : 900 / 250 mm
- Operating temperature : '-20°C to +50°C
- Connection cable : 15 m of hydraulic pipes supplied
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product