EDR12
Retractable power distribution bollard: water, electricity, compressed air, etc.
Power distribution
EDR12
Retractable power distribution bollard: water, electricity, compressed air, etc.
Standard characteristics:
- Retractable power distribution bollard
- Retractable bollard:
- Gas cylinder-assisted pivoting opening
- Customised double-pin lock
- Differential circuit breakers protected under IP66 window
- Automatic ventilation of the junction box to prevent equipment condensation (bollard open)
- Equipment integrated on a stainless steel retaining flange
- Frame:
- Stainless steel frame
- Stainless steel filling cover plate (35 mm high)
- Cable guide for bollard use in the closed position
- High tread resistance in the closed position
- 63 or 125 A / 400 V mains circuit breaker
- NFC 17-200 / NFC 15-100-compliant
Optional features:
- Non-slip chequered stainless steel sheet
- Heating element + hygrotherm
- Customisable electrical equipment
- Water tap integration
- Electricity meter on sockets
- Low current
- Exogel system
- Power supply : 400 V
- Foundation dimensions (LxWxH) : 350 x 490 x 740 mm
- Overall dimensions (LxWxH) : 340 x 35 x 460 mm
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBM H12
The LBMH 12 is designed to operate in the open position and to be closed occasionally to close off access to one lane (roads, motorways, lane closures). Can be used on motorways or in urban areas. Length up to 12 m.
See the product
TOTEM TDCA
The TDCA totem pole is a cylindrical piece with a diameter of 25 cm and a variable height between 160 and 250 cm. Made of steel, this totem is composed of several stackable modules to meet all operational needs. It can be fitted with traffic lights and access control equipment (LPR, intercom, badge reader, etc.)
See the product
TOTEM TSC-S
The TSC-S totem is a stylish piece with an elliptical shape, measuring 180 cm high, 448 mm long and 331 mm wide. Made of steel, it enables the integration of a One-C module with its hydraulic pump. Equipped with two flat surfaces oriented at 45°, it allows the integration of traffic lights and the access control equipment needed for operation (LPR, intercom, badge reader, etc.). Innovative in its design and fittings, this totem can be equipped with a screen for a live view of the bollard and the front of the vehicle.
See the product
RB90C65
The ALE RB90-C65 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 90 cm in height, it is available in lengths of 2 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 50 cm high, so the device can be sealed in a 55 cm deep excavation. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered stainless steel sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB90 does not contain any integrated sensitive elements. Its resistance is certified with a double crash test, during which the RB90 stopped two 7.5-tonne HGVs travelling consecutively at 64 km/h with the device remaining operational after the both impacts and without vehicle penetration, supplemented with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1 proving its ability to stop a 7.5-tonne HGV at 80 km/h.
See the product
EDR 24
The ALE EDR24 is a retractable power distribution bollard with a capacity of 10 to 12 x 230V sockets. It has a gas spring-assisted pivoting opening system. The frame is made of galvanised steel, and all visible and moving parts are made of stainless steel. The EDR24 bollard is equipped as standard with a filling cover plate to imitate the type of floor in the construction. The cover plate is equipped with two cable guides, allowing the bollard to be used while connected, in the closed position. The EDR24 bollard is custom-made according to the user’s needs and can accept any type of power (230V / 400V electricity, water, compressed air, RJ45, sound system, etc.). The retaining flange housing the equipment is made of reinforced stainless steel, and can be dismantled. It is delivered separately from the bollard, ensuring that the product is intact when received by the customer. The sockets are IP67, and the electrical protections are integrated under an IP67 window. It is locked with a pin lock, with no sunken relief, facilitating preemption and cleaning
See the product