A25-60 C80
Automatic retractable bollard - Withstands the impact of a 7.5-tonne HGV at 64 km/h
Automatic retractable bollards
A25-60 C80
Automatic retractable bollard - Withstands the impact of a 7.5-tonne HGV at 64 km/h
Standard characteristics:
- Cylinder:
- Steel treated with zinc plating and epoxy powder coating Ø 25 cm - height 60 cm
- RAL 7016 colour
- Stainless steel bollard top, thickness 20 mm
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Frame:
- Heavy-gauge steel floor plate protected by a stainless steel cover plate
- Frame made of 6 mm thick galvanised steel
- Lateral guide with HDPE sliders and rollers
- M16 anchor bracket, strengthening connection to the concrete foundation
- Drive system:
- Remote hydraulic drive (factory connected circuit), the bollard is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
- Low limit switch integrated into the cylinder head, accessible without disassembling the bollard
- Biodegradable hydraulic oil with low viscosity variation
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the accessibility of roads and public spaces
Optional features:
Security
- Upper limit switch
- Snap-off nuts to secure bollard access
- Heating system for cold weather or exposure to snow or frost conditions
- Cold weather oil
Customisation
- Choice of RAL colours
- Paint with seafront treatment
- LED strip and customisation on the bollard head
- Installation aid: Installation kit (steel cage foot hanger)
- Operation time : 4 to 6 seconds
- MCBF (number of cycles) : 2 000 000
- MTBF (hours) : 25 000
- MTTR (min) : 30 min
- Finishes : RAL 7016 steel colour
- Drive system : Remote hydraulics
- Resistance : 1,160,000 J
- Foundation dimensions (LxWxH) : 450 x 430 mm
- Overall dimensions (LxWxH) : 600 / 250 mm
- Operating temperature : '-20°C to +50°C
- Connection cable : 15 m of hydraulic pipes supplied
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
LBM 8
The easy-to-install, robust boom barrier. The LBM 8 works effortlessly thanks to its compression springs. Features a lateral operating handle and an arm locking system for added safety. Ideal for closing off little-used lanes, occasional access points or temporary path closures.
See the product
A25-100 7548
The ALE A25-100-7548 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high and RAL-painted, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with ISO 22343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 m/h with the bollard remaining operational after the impact and without vehicle entry. A wide range of configurations is available, including stainless steel sleeves, seafront treatment or integrated LEDs.
See the product
A25-100 C80
The ALE A25-100-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high, the bollard is lined with a microblasted stainless steel shell and can incorporate an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with IWA 14-1, during which the bollard stopped a 7.2-tonne HGV travelling at 80 m/h with the bollard remaining operational after the impact.
See the product
TOTEM TDCA
The TDCA totem pole is a cylindrical piece with a diameter of 25 cm and a variable height between 160 and 250 cm. Made of steel, this totem is composed of several stackable modules to meet all operational needs. It can be fitted with traffic lights and access control equipment (LPR, intercom, badge reader, etc.)
See the product