Mechanical retractable bollards
M20-70
Manual retractable bollard
Standard characteristics:
- Cylinder:
- Steel treated with zinc plating and epoxy powder coating Ø 20 cm - height 70 cm RAL 7016 colour
- Brush seal to prevent scratching on housing
- Class 2 reflective tape
- Flat bollard head
- Frame:
- Steel floor plate in RAL 7016 colour
- Lateral guide with HDPE sliders
- Operation:
- Preconfigured for use with captive key
- Lock positioned under the frame and protected in the event of impact
- 11 mm triangle lock release system (emergency services)
- Operated by a locking key which, once inserted in the bollard head, acts as a lifting handle, with gravity lowering system
- Automatic lock in high and low position
- Standards:
- NFP 98-310-compliant
- Dimensions compliant with the French Decree of 18/09/2012 on the technical specifications for accessibility of roads and public spaces
Optional features:
Security
- Anti-vandalism screws
- Secure lock head
Customisation
- Choice of RAL colours on bollard
- Choice of RAL colours on floor plate
- Paint with seafront treatment
- Finishes : RAL 7016
- Foundation dimensions (LxWxH) : 310 x 310 mm
- Overall dimensions (LxWxH) : 700 mm / 200 mm
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
F20-70
The ALE-F20-70 static bollard manufactured by AMCO is 20 cm in diameter and 70 cm high above ground. This model is also available in a stainless steel version. A wide range of configurations is available, including RAL colours, extra height, seafront treatment, integrated LEDs or customised sleeve.
See the product
R22-100 C50
The R22-100 C50 removable bollard manufactured by AMCO is a steel bollard 22 cm in diameter and 1 m high. With a depth including an 8 cm gap for floor finishes. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which a bollard stopped a 7.5-tonne HGV travelling at 48 km/h.
See the product
A25-60-1548
The ALE A25-60-1548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA 14-1, during which the bollard stopped a 1.5-tonne car travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system
See the product
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product