RB100-C80
Retractable road blocker - Withstands the impact of a 12-tonne HGV at 80km/h
Road blocker & Tyre Killers
RB100-C80
Retractable road blocker - Withstands the impact of a 12-tonne HGV at 80km/h
Standard characteristics:
- Tread plate:
- Chequered stainless steel tread plate
- Driving surface composed of multiple plates removable by a person working alone
- Front part:
- Moving section treated by hot-dip galvanising and covered with a flexible front part preventing deformation and risks of the device jamming
- Frame: Low depth in galvanised steel
- Drive system:
- Remote hydraulic drive system (factory connected circuit), the road blocker is supplied with 15 m of oil-filled reinforced pipes with push-pull type quick coupler
- Biodegradable hydraulic oil with low viscosity variation
Installation:
- Installation and sealing in 24 hours
- Water outlets preconfigured for connection with Ø100 PVC
Optional features:
Security
- LED strip on the front part
- Horizontal retroreflective tape
- EFO: Extra Fast Operation
Customisation
- Frost-free cylinder system
- Cold weather oil
- Upper limit switch
- Maximum length : 4 m
- Operation time : 4 to 6 seconds
- MCBF (number of cycles) : 2 million
- MTBF (hours) : 25,000 h
- MTTR (min) : 30 min
- Finishes : RAL 9010 & 3001 flexible front part
- Drive system : Remote hydraulics
- Resistance : 2,900,000 J
- Overall dimensions (LxWxH) : 2.5m / 3m and 4m
- Passage width : Up to 4 m
- Connection : 15 m of hydraulic pipe
A project? Let's talk.
Our teams guide you in defining the most suitable solution for your needs.
Other products
A25-60-3548
The ALE A25-60-3548 bollard manufactured by AMCO is an automatic retractable bollard with a hydraulic drive system. Made of steel 25 cm in diameter and 60 m high, the bollard is lined with a microblasted stainless steel shell and incorporates an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The drive system and limit switches are integrated in a separate compartment, accessible without disassembling the bollard. The bollard is supplied with an installation casing and 10 m of cable for connection to the One-C control module. Its resistance is certified with a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, during which the bollard stopped a 3.5-tonne HGV travelling at 48 km/h without vehicle entry. This model is also available with a remote hydraulic drive system.
See the product
A25-100 7548
The ALE A25-100-7548 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high and RAL-painted, the surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with ISO 22343-1, during which the bollard stopped a 7.2-tonne HGV travelling at 48 m/h with the bollard remaining operational after the impact and without vehicle entry. A wide range of configurations is available, including stainless steel sleeves, seafront treatment or integrated LEDs.
See the product
A25-100 C80
The ALE A25-100-C80 bollard manufactured by AMCO is an automatic retractable bollard with a remote hydraulic drive system. Made of steel 25 cm in diameter, 1 m high, the bollard is lined with a microblasted stainless steel shell and can incorporate an LED strip. The surfaces exposed to tread (top of bollard and floor plate) are made of stainless steel. The bollard is supplied with 15 m of hydraulic pipe for connection to the One-C control module. This bollard is motorised by an industrial hydraulic pump, which is offset in an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the bollard does not contain any integrated sensitive elements Its resistance is certified with a crash test carried out in accordance with IWA 14-1, during which the bollard stopped a 7.2-tonne HGV travelling at 80 m/h with the bollard remaining operational after the impact.
See the product
SA25-60C80
The ALE SA25-60 C80 bollard manufactured by AMCO is a retractable mechanical security bollard with semi-automatic operation. Made of steel, with a diameter of 25 cm and a height of 60 cm, it is lowered by pressing on the bollard and raised automatically by a gas cylinder. The lock is a multi-level security device that can only be operated with the key supplied. It is integrated into the bollard head, and the floor plate and the top of the cylinder are made of stainless steel. A wide range of configurations is available, including RAL colours, seafront treatment, emergency services lock and anti-vandalism screws. Its resistance is certified with a crash test, during which the bollard stopped a 1.75-tonne HGV travelling at 80km/h, with the bollard remaining operational after the impact and without vehicle entry, supplemented by a digital crash test carried out by an independent Cofrac-accredited body in accordance with IWA14-1, proving its ability to stop a 7.5-tonne HGV travelling at 64km/h.
See the product
RB50-C50 FP
The ALE RB50-C50 FP road blocker, manufactured by AMCO, is a hydraulically powered automatic security barrier. Measuring 50 cm in height, it is available in lengths of 2.5 to 4 m. The RB50 is supplied with 15 m of hydraulic pipe for connection to the One-C technical module. Its galvanised steel frame is just 12 cm high, allowing the device to be sealed in a 30 cm deep excavation. The RB50 can also be fixed to an existing or new concrete slab with access ramps. The bellows side is made of a flexible material that prevents the device from jamming in the event of an impact. The surface exposed to the tread is composed of multiple chequered sheets removable by a person working alone and provides access to inspection hatches for visual inspection inside the device. This road blocker is powered by an industrial hydraulic pump, which is offset to an adjoining unit (Totem, cabinet, technical room, etc.). The underground part of the RB50 does not contain any integrated sensitive elements. Its resistance is certified by a digital crash test carried out by an independent Cofrac-accredited body in accordance with ISO 22343-1. The RB50 stopped a 7.2-tonne HGV travelling at 48 km/h. "
See the product